American DJ
®
- www.americandj.com - Nucleus PRO Instruction Manual Page 11
American DJ
®
- www.americandj.com - Nucleus PRO Instruction Manual Page 12
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP
- This will “flip” the LED display 180º.
1. Press the MENU button until “d
ISP
” is displayed, press
ENTER.
2. Either “d
ISP
” or “d
SIP
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
TEST
- This function will run a self test program.
1. Press the MENU button until “
TEST
” is displayed, press
ENTER.
2. The fixture will now run a self test.
MANU
- With this function you can manually control and
adjust each LED.
1. Press the MENU button until “
MANU
” is displayed, press
ENTER.
2. Press the UP or DOWN buttons to find and manually adjust
the individual LEDs.
TEMP
- With this function you can check the temperature
of the fixture.
1. Tap the MENU button until “
TEMP
” is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press
Nucleus PRO
System Menu
mode to run without sound activity turn sound activity off.
1. Press the MENU button until “
SHND
” is displayed, press
ENTER.
2. “
S
h
X
” will now be displayed, “X” representing a number
between 0-17. Programs 0-17 are factory programs, while “
S
h
0
” is random mode. Press the UP or DOWN buttons to find your
desired show and press the ENTER, then press and hold the
MENU button for at least 3 seconds to confirm.
SOUN -
Sound Active mode.
1. Press the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press the ENTER, and then press and hold the MENU button
for at least 3 seconds to confirm.
BLND -
Blackout or Stand by mode.
1. Press the MENU button until “
BLND
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “
LED
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
Nucleus PRO
System Menu
