Set Up
MyDMX V1.0
Page 13
6. Enter a starting Index number that you wish to assign to your fixtures. The Index number is simply
a number that will automatically be assigned to each fixture to make it easier for you to recognize it
during the programming process. For example, if the Index # is set to 1, and (4) Accu Scan 250
fixtures are added, the index numbers will display as “accu scan 250. , accu scan 250. ,
accu scan 250. and accu scan 250. ... See diagram below.
1
2
3
4
7. Left click the “Patch” button to add the fixtures. Like the picture shows above, your fixtures will
automatically be added to the grid. To add additional fixtures, repeat steps 1 thru 7.
You can also drag and drop fixture profiles directly from the Scan Library folders onto the DMX grid
like pictured below. If you use this method of adding fixtures, be sure to drop each fixture onto
available DMX channels. Available DMX channels are white boxes with black numbers on them.
