background image

  TRIBAR Spot                                               Specifications 

  Model:  TRIBAR Spot

 

  Voltage:    

 

100V ~ 240V 50/60Hz 

  LEDs: 

 

 

6 x 5W 3-in-1 LED’s

  Beam Angle: 

 

12 Degrees

  Power Consumption: 

40W

  Power Cord Daisy Chain: 25 Fixtures Max.

  Fuse: 

 

 

1 Amp

   Weight:     

 

11lbs./ 4.9Kgs.

   Dimensions:  

 

31.5” (L) x 3.54” (W) x 9.05” (H)

   

 

 

 

800 x 90 x 230mm

   Colors: 

 

 

RGB Color Mixing

  DMX Channels:   

7 DMX Modes: 3 Channel Mode,   

   

 

 

 

5 Channel Mode, 6 Channel Mode,  

   

 

 

 

8 Channel Mode, another 8  

 

   

 

 

 

Channel Mode, 11 Channel Mode,  

   

 

 

 

& 20 Channel Mode  

  Working Position:   

Any safe working position

  Warranty:                         3 Year (1,095 days)

Please Note: Specifications and improvements in the design of 

this unit and this manual are subject to change without any prior 

written notice.

Auto Sensing Voltage:

 This fixture contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged 

into the power source.

ADJ Products, LLC  -  www.adj.com  - TRIBAR Spot User Manual Page 27

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.adj.com / E-mail: [email protected]

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.adj.com

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Summary of Contents for MEGA TRI38 SYSTEM















Reviews: