ADJ Products, LLC - www.adj.com - LED UV GO Instruction Manual Page 5
ADJ Products, LLC - www.adj.com - LED UV GO Instruction Manual Page 6
LED UV GO System Menu
LED UV GO System Menu
DIMM -
Dimmer Mode
1. Press the MENU button until “DINN” is displayed, press
ENTER.
2. “dXXX” will now be displayed, “XXX” representing a number
between 0-255. Use the UP of DOWN buttons to adjust the
output intensity.
3. Once you have found your desired intensity, press ENTER to
confirm.
STRO
-
Strobe mode
1. Press the MENU button until “STRO” is displayed, press
ENTER.
2. “SP X” will now be displayed, “X” representing a number
between 1-9. These are the strobe speeds, 1 being the slowest,
and 9 being the fastest. Use the UP and DOWN buttons to adjust
the strobe speed.
3. Press ENTER to confirm.
On-Board System Menu.
The LED UV GO comes with an easy to
navigate system menu. This next section will detail the functions of
each command in the system menu. Please read the next section
thoroughly!
To access the main menu press the MENU button. Tap the UP or
DOWN buttons until you reach function you wish to change. When you
reach the function you wish to change press the ENTER button. When
a function is selected use the UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to confirm and lock the change into the system memory. If the MENU
button is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To
exit without making any changes press the MENU button.
MENU
LED Display Off
LED Display Always On
Inversion
Normal
Fixture Hours
Dimmer Mode
Strobe Mode
Blackout mode
Battery state
