![background image](http://html.mh-extra.com/html/american-dj/led-uv-go/led-uv-go_user-instructions_2923128004.webp)
ADJ Products, LLC - www.adj.com - LED UV GO Instruction Manual Page 7
ADJ Products, LLC - www.adj.com - LED UV GO Instruction Manual Page 8
LED UV GO System Menu
BLND
- This will control blackout
1. Press the MENU button until “BLND” is displayed, press
ENTER.
2. Either “YES” or “NO” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button for at
least three seconds to confirm.
LED
- With this function the LED display will turn off after
2 minutes.
1. Press the MENU button until “LED” is displayed, press ENTER.
2. Either “ON” or “OFF” will now be displayed. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at all
times, or “OFF” to allow the LED display to turn off after 2 min-
utes. Press any button to turn on the LED display again.
3. Press ENTER, and then press and hold the MENU button
for at
least three seconds
to confirm.
DISP
- This will “flip” the LED display
1. Press the MENU button until “DISP” is displayed, press
ENTER.
2. When “DISP” is displayed the LED display will remain normal,
when “DSIP” is displayed, the LED display will be “flipped”.
Use the ENTER button to find your desired display set up, then
press MENU to confirm and exit.
BATT
- This function is used for checking the battery
status and battery charging.
1. Press the MENU button until “BATT” is displayed, press
ENTER.
LED UV GO System Menu
2. Either “CHAR”, “LOAD”, or “STAT” will be displayed. Use the
UP or DOWN buttons to scroll through the functions, and press
ENTER to select your desired function.
• CHAR (Charging) - When this is selected you are able to charge
or stop charging the battery. When a power cable is connected
and “ON” is selected, the battery is now being charged. To stop
charging, select “OFF”.
• LOAD (LED On or OFF) - This will let you blackout the LED while
charging. Select “OFF” to blackout the LED or “ON” to stop the
LED blackout.
• STAT (Charge Status) - This will let you check the battery status.
3. Press ENTER to confirm your setting and exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “FHRS” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- This will display the software version
1. Press the MENU button until “VER” is displayed. Press the
ENTER button and the software vesion will be displayed.
2. Press the MENU button to leave this function.