American DJ
®
- www.americandj.com - GP 250™ Instruction Manual Page 5
GP 250™
Features
The GP 250™ carries a one year limited warranty. Please fill out the
enclosed warranty card to validate your purchase. All returned service
items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. The R.A. number
must be clearly written on the outside of the return package. A brief
description of the problem as well as the R.A. number must also be
written down on a piece of paper and included in the shipping carton.
If the unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our toll free customer support number. All
packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper
at the shippers cost.
GP 250™
Product Registration
American DJ
®
- www.americandj.com - GP 250™ Instruction Manual Page 6
To optimize the performance of this product, please read these operating
instructions carefully to familiarize yourself with the basic operations of
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with
the unit, for future reference.
GP 250™
General Instructions
GP 250™
Controls and Functions
1. Power Cord Inlet and Fuse Holder
Power Cord Inlet -
This unit is equipped with a removable I.E.C. power
cord. Be sure to only use the power cord included with the unit, this
cord is designed to match the electrical requirements of the unit. Other
cords may cause the unit to overheat or malfunction. Voltage may vary
from venue to venue, when connecting this unit to a power supply be
sure to connect to a matching power outlet. Never use this fixture if
the ground prong has been removed or broken off. The ground prong
is designed to reduce the risk of fire or electrical shock in the event the
unit suffers from an internal short.
Fuse Holder -
This housing stores a 8 amp (4 amp 220v) GMA pro-
tective fuse. Never defeat the fuse, the fuse is designed to protect the
electronics in the event of severe power fluctuations. Always be sure
to replace the fuse with an exact match as the one being replaced,
unless otherwise told to do so by an authorized American DJ
®
service
technician.
2. XLR Output Jack -
This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next GP 250™ in the chain. For best results in DMX or Master/
Slave mode terminate this jack if it is the last unit in the chain. See
“Terminator” on page 10.
1
5
4
3
2
9
8
7
6
• Micro-Stepping Motors
• DMX-512 Protocol Compatible (Uses Four DMX Channels)
• 3 Operating Modes - Master/Slave; Stand Alone; Sound Active
• Colored Gobo Wheel
• Internal Microphone
• ZB-EHJ5 24V/250W
• Manual Focus Lens
• Mini/C Input Jack for Blackout Function
(Mini/C Controller Not Included)
