13. Auto/Del
Activates Auto mode or to delete scenes or chases.
1. Overview
1. Overview
2. Scene Buttons
3. Faders
4. Page Select Button
5. Fog Machine Button
6. Speed Slider
7. Fade Time Slider
8. LCD Display
9. Pan Wheel
10. Tilt Wheel
11. Program Button
14. Music/Bank Copy
15. Bank Up/Down
16. Tap/Display
17. Blackout Button
18. Chase Buttons(1-6)
19. Fine Button
20. Mode Button
2. MIDI IN
4. DMX Out
5. DMX In
6. Fog Machine Connector
7. DC Input
8. Power Switch
3. DMX Polarity Select
There are a maximum of 240 programmable scenes.
Receives MIDI data.
Used to select DMX polarity.
or DMX pack.
This connector accepts your DMX input signals.
This connector is used to plug in the Fog Machine.
DC 9 -12V, 300mA min.
This switch turns On/Off the power.
This connector sends your DMX value to the DMX scanner
or channel 9-16 depending upon the selected page.
Used to select page between Page A(1-8) and Page B(9-16).
Activates Fog Machine .
to 10 minutes.
another, for the dimmer to fade in or fade out.
Shows the current activity or programming state.
programming.
This jog wheel is used to control the pan of the scanner or for
programming.
Activates Program mode.
Activates Music mode or to copy a bank of scenes.
12. MIDI/Rec
Used to control MIDI operation or to record programs.
Press the Up/Down button to select from 30 banks.
between % and 0-255.
Tap to momentarily pause whole output.
programmed scenes.
scanner in the smallest increment.
Pressing Fine and Mode buttons allows to activate Assign
or Reverse mode.
When Fine is on, the Pan or Tilt wheel will control the
These buttons are used for activating the chase of
Used to create a standard beat or to change the value mode
This jog wheel is used to control the Tilt of the scanner or for
it takes for a scanner(or scanner) to move from one position to
Used to adjust the fade time. Fade time is the amount of time
Used to adjust the chase speed within the range of 0.1 second
These faders are used to control the intensity of channel 1-8
Press the scene buttons to load or stored your scenes.
1.2 Rear View
1.1 Front View
5
6
+
1
2
3
4
5
6
7
DMX OUT
DMX Polarity Select
1
2
3
1=Ground
2=Data +
3=Data
1=Ground
2=Data
3=Data +
FOG
MACHINE
DC INPUT
DC 9V - 12V
300mA min.
+
MIDI IN
AUDIO
DMX OUT
DMX IN
1 1
2
2
3
3
POWER
ON OFF
0.1V~1Vp-p
8
1. AUDIO IN
0.1V~1Vp-p.