![background image](http://html1.mh-extra.com/html/american-dj/dmx-operator-ii/dmx-operator-ii_user-manual_2922608034.webp)
2. Operation Guide
2.6 Running Scenes
2.6.1 Manual Mode
2.6.2 Auto Mode
SCENE
Auto/Del
4. Tap the Scene button to select the scene
to run.
1. When the power is turned on, this unit enters Manual mode automatically.
This function allows you to run a bank of programmed scenes in a sequential loop.
2. Make sure Auto and Music LEDs are both off.
3. Use the Bank Up/Down button to select the bank that contains the scenes you
wish to run.
1. Tap the Auto/Del button to activate Auto mode.
The Auto LED lights indicating Auto mode is
active.
32
2. Operation Guide
2.5 Set Up a new Logo
31
6. Press the Scanner 6 and 12 buttons at a time
to store the new characters into memory, all
LEDs should flash briefly indicating this oper-
ation. If you are not going to save these new
characters, just tap the Blackout button to
leave this operation.
SCANNER 6
SCANNER 12