2. Operation Guide
2.4.1 Assign DMX channel
2. Operation Guide
2.4.2 Reverse DMX channel
6. Tap the Page Select button to select Page A or
Page B.
8. Continue steps 3-7 , you may assign a maximum
of 48 DMX channels for 12 scanners.
7. While pressing the Mode button, tap the Scene
button, all LEDs should flash briefly indicating
the DMX channel is assigned.( Scene button 1
stands for DMX channel 1, Scene button 2 stands
for DMX channel 2, and so on.)
1. Program enable.
3. Use Bank Up/Down button to change between
the Pan and Tilt, the corresponding LED lights
indicating this selection.
4. Tap the Tap/Display button to change between
8 CH. and 16 CH. mode.
5. Tap the Scanner button to select the scanner.
SCANNER
Page
Select
MODE
SCENE BUTTONS 1-8
TAP/Display
24
23
2. Press the Fine and Mode buttons the second
time, the Reverse LED lights up indicating
Reverse mode is active.
FINE
MODE
ASSIGN
REVERSE
BANK