![background image](http://html1.mh-extra.com/html/american-dj/accu-spot-575/accu-spot-575_user-instructions_2922647009.webp)
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 18
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 17
Accu Spot 575
System Menu
On-Board System Menu.
The Accu Spot 575 comes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu.
Enter Button -
To access the main menu locate the ENTER button
(7)
on the side of the unit. Press this button to activate the system
menu. Tap the UP
(5)
or DOWN
(6)
butons until you reach function you
wish to change. When you reach the function you wish to change tap
the ENTER button
.
When a function is selected the menu will begin to
flash, use the
UP or DOWN buttons to change the function. Once your
changes are made tap the ENTER button
again to lock the change in
the system, if the ENTER button
is not selected within eight seconds
the system will automatically return to menu section. To exit without
making any changes tap the MODE/ESC button
(4)
.
ADDR
MAIN MENU -
ADDR
DMX Address Setting
via control board -
1. Access the main menu.
2. Tap the UP button until “
ADDR
” is displayed, press ENTER.
4. Now the display will show “
A001
”. Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on
“
A001
”,
you can directly press the UP
or DN buttons to change the DMX start address.
TEST
MAIN MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until “
TEST
” is displayed, press ENTER.
3. The display will show “
T-01
”. You can now press the up
DFSE
(Default Settings) - Resets the unit to the default settings.
FEED
- Pan/Tilt feedback (error correction) on/off.
SPEE
- Select the movement mode.
DIMM
- Select the dimmer speed.
FANS
- Select the fan run mode .
VER
(Version) - Displays the software version
ADJU
- Calibration functions
EDIT MENU -
STEP
(S-01 - S-48) - These are the steps slots that you write
your programs into. There are at total of 48 steps. See edit pro-
gram, page 25.
SCXX
(SC01 - SC30) - These are the scenes that are stored in
your program. There are a total of 30 scenes.
C-XX
(C-01 - C-08) - These are the channels of each scene that
can be edited..
TIME
(Time) - Running time of the entire program.
CEDT
- Edit a program using a external controller.
REC
- This will auto save your custom program.
RUN
- This will run your custom program.
Accu Spot 575
System Menu