Accu Spot 575
System Menu
Accu Spot 575
System Menu
3. Tap the UP button until “
SCAN
” is displayed.
4. Press ENTER to reset the pan/tilt motors, or press MODE/
ESC to cancel and return to the main menu.
COLR
- When you activate this reset function, the fixture
will only reset the color wheel motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
COLR
” is displayed.
4. Press ENTER to reset the color wheel motor, or press MODE/
ESC to cancel and return to the main menu.
GOBO
- When you activate this reset function, the fixture
will only reset the gobo wheel motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
GOBO
” is displayed.
4. Press ENTER to reset the gobo wheel motor, or press MODE/
ESC to cancel and return to the main menu.
SHTR
- When you activate this reset function, the fixture
will only reset the shutter/dimmer motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
SHTR
” is displayed.
4. Press ENTER to reset the shutter/dimmer motor, or press
MODE/ESC to cancel and return to the main menu.
OTHR
- When you activate this reset function, the fixture
will reset all other motors that are not listed in RESET
menu.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
OTHR
” is displayed.
4. Press ENTER to reset all other motors, or press MODE/ESC
to cancel and return to the main menu.
TIME
MAIN MENU -
LIFE
- With this function you can display the total running
time of the unit.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
LIFE
” is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
LAMP
- With this function you can display the running time
of the lamp.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
LAMP
” is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
CLMP
- With this function you can clear the running time of
the lamp. Note Very Important: Please clear the lamp time
every time you replace the lamp.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
CLMP
” is displayed, press ENTER.
©
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 22
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 21
