Accu Spot 575
System Menu
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 16
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 15
SHTR
- Resets the shutter/dimmer motors.
OTHR
- Resets all other motors.
TIME MENU -
LIFE
- Displays the fixtures total running time.
LAMP
- Displays the lamp running time.
CLMP
- Clears the lamp running time.
RPAN (REVERSE PAN) MENU -
ON/OFF
- When “On” is chosen it will reverse the pan.
RTILT (REVERSE TILT) MENU -
ON/OFF
- When “On” is chosen it will reverse the tilt.
FINE MENU -
ON/OFF
- Switch between 8bit and 16bit.
DEGR MENU -
630/540
- Switch the degree of the Pan between 630 and 540.
MIC MENU -
M-01-M-70
- With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU
(DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON
(Display On) - Turns digital display on or off.
FLIP
- “Flips” the digital display 180º.
SPEC MENU -
LAAU
- Automatic lamp start with power.
RDMX
- Lets you adjust the DMX address via external controller.
DLOF
- Switch lamp on via DMX.
DLAY
- Set a delay time for the lamp.
SPOT
- This provides a spot beam for better lamp optimization.
Accu Spot 575
System Menu
ADDRESS MENU -
AOO1 - A511
(Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX
(Test) - Tests the functions of each channel. There
are sixteen channels.
Note: Some channels cannot be tested.
PLAY MENU -
RUN
- Runs the unit as a “master” or in a stand alone mode. The
unit will run a internal program mode.
AUDI
(Audio) - Runs the unit as a “master” or in a stand alone,
sound active mode.
AUTO
- This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Hold” - This is the default setting, which in case the signal is
lost the fixture will “hold” at the last setting.
• “Close” - The fixture will return to its “home” standing.
• “Auto” - The fixture will go into Auto mode and run a pre-pro-
grammed show.
• “Audi” - The fixture will go into Sound Active mode.
LAMP MENU -
ON/OFF
- Manually switch the lamp “on” and “off”.
RESE (RESET) MENU -
ALL
- Resets all the motors in the unit.
SCAN
- Resets the motors that control pan/tilt.
COLR
(Color) - Resets the color motors.
GOBO
- Resets the gobo motors.