Accu Spot 575
Controls and Functions
1. Lens Assembly -
This is a high quality lens that is focused by
using the Lamp Optimization in DMX Mode.
2. Software Update Input Jack -
This jack is used to update the
latest software version into the unit.
3. Digital Display -
This display shows the menu and operating func-
tions that you can choose from.
4. Mode/ESC Button -
This button is used to exit menus and to scroll
backwards through certain menus only.
5. Up Button -
This button is used to scroll forward when navigating
through the system menu.
6. Down Button -
This button is used to scroll backwards when navi-
gating through the system menu.
7. Enter Button -
This button is used to select and confirm a func-
tion when working in the system menu. It is also used to exit certain
menus.
8. Carrying Handles -
The includes built-in carrying handles. Be sure
to always handle the unit by the built-in handles. Never lift or carry-
ing the unit by head or yoke. Pulling on or transporting the unit by the
moving head may severely damage the unit and will void the unit war-
ranty.
7. Microphone -
This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
9. XLR Output Jack -
This jack is used to transmit the incoming
DMX signal to another DMX fixture, or transmit a Master/Slave signal
to the next Accu Spot 575 in the chain. For best results in DMX or
Master/Slave mode terminate this jack if it is the last unit in the chain.
See “Terminator” on page 11.
10. XLR DMX Input Jack -
This jack is used to receive an incoming
DMX signal or Master/Slave signal.
11. Fuse Holder -
This housing stores a 8 amp (4 amp 220v) GMA pro-
tective fuse. Never defeat the fuse, the fuse is designed to protect the
Accu Spot 575
Controls and Functions
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 9
electronics in the event of severe power fluctuations. Always be sure
to replace the fuse with an exact match as the one being replaced,
unless otherwise told to do so by an authorized American DJ
®
service
technician.
12. Power Cord Inlet -
This unit is equipped with a removable I.E.C.
power cord. Be sure to only use the power cord included with the
unit, this cord is designed to match the electrical requirements of the
unit. Other cords may cause the unit to overheat or malfunction. Volt-
age may vary from venue to venue, when connecting this unit to a
power supply be sure to connect to a matching power outlet. Never
use this fixture if the ground prong has been removed or broken off.
The ground prong is designed to reduce the risk of fire or electrical
shock in the event the unit suffers from an internal short.
13. Cooling Fan -
This unit is equipped with three high velocity vari-
able fans to aid in the cooling process. These fans are designed to
vary their velocity at different operating temperatures, to provide
better cooling when the unit reached higher operating temperatures
associated with long usage. Be sure to never obstruct the cooling fans
during normal usage. Also, be sure to keep the vents clean at all times.
A blocked or malfunctioning cooling system may shorten lamp life and
unit reliability.
American DJ
®
- www.americandj.com - Accu Spot 575 Instruction Manual Page 10
