American DJ
®
- www.americandj.com - Accu Spot 300 Instruction Manual Page 41
American DJ
®
- www.americandj.com - Accu Spot 300 Instruction Manual Page 42
Channel Value
Function
9 240 - 247 MACRO 15
248 - 255 MACRO 16
10 SPEED OF PAN/TILT MOVEMENT
0 MAX. SPEED
5 - 225 MAX. TO MIN. SPEED
226 - 235 BLACKOUT BY MOVEMENT
236 - 245 BLACKOUT BY WHEEL MOVEMENT
246 - 255 NO FUNCTION
11 LAMP ON/OFF/RESET/INTERNAL PROGRAMS
0 - 19 COLOR CHANGE NORMAL
20 - 39 COLOR CHANGE TO ANY POSITION
40 - 59 LAMP ON
60 - 79 LAMP SWITCH OFF
80 - 84 ALL MOTORS RESET
85 - 87 SCANNER MOTOR RESET
88 - 90 COLOR WHEEL MOTOR RESET
91 - 93 GOBO WHEEL MOTOR RESET
94 - 96 SHUTTER/DIMMER MOTOR RESET
97 - 99 OTHER MOTOR RESET
100 - 119 INTERNAL PROGRAM 1
120 - 139 INTERNAL PROGRAM 2
140 - 159 INTERNAL PROGRAM 3
160 - 179 INTERNAL PROGRAM 4
180 - 199 INTERNAL PROGRAM 5
200 - 219 INTERNAL PROGRAM 6
220 - 239 INTERNAL PROGRAM 7
240 - 255 SOUND ACTIVE
Accu Spot 300
DMX Traits cont.
Accu Spot 300
Gobo Replacement
This unit comes with interchangable gobos. Changing the
gobos is a easy procedure. Follow the instructions below.
Caution!
Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
moving head. The top half of the moving head does not have
the lens in front. The lens is on the bottom half of the head.
2. First start by removing the front metal plate by unscrewing
the four phillips screws. Now, unscrew the two phillips
screws in the front of the moving head and the two in the
back. Remove the top half of the shell.
3. When you remove the top shell you will be able to access the
gobo wheel. Turn the wheel with your hand until you come
across the gobo you would like to change. Now turn the
color wheel so that the empty space appears behind the
gobo that you want to change.
4. Remove the fixation-ring with a small flat-head screwdriver.
Put your finger through the empty space in the color wheel,
and push the gobo out towards the front. When doing this
you do not need a lot of pressure. You can also use tweezers
to gently pull the gobo out, or a small flat-head screwdriver
and gently pry out the gobo.
5. Change the gobo, replace the fixation-ring, and reassemble
the unit.
