button and test the different channels. For example: If you
press the up button until “
T-03
” is displayed, the unit will test
the color channel, changing the color one by one and show the
rainbow effect with different speeds. There are eleven channels,
but only channels 1, 2, 3, 4, 6, 7, and 9 can be tested.
5. Press MODE/ESC to exit.
PLAY
MAIN MENU -
RUN
Run the unit as a “master”, or as a stand alone unit,
in a internal program -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
MSTR
” is displayed, press ENTER.
4. Press MODE/ESC to return to the main menu.
AUDI
Run the unit as a “master”, or as a stand alone unit,
in a sound active mode -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUDI
” is displayed, press ENTER to
confirm.
4. Press MODE/ESC to return to the main menu.
AUTO
Runs the unit in Sound Active mode or a Auto pro-
gram -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
American DJ
®
- www.americandj.com - Accu Spot 300 Instruction Manual Page 18
Accu Spot 300
System Menu
American DJ
®
- www.americandj.com - Accu Spot 300 Instruction Manual Page 17
Accu Spot 300
System Menu
3. Tap the UP button until “
AUTO
” is displayed, press ENTER to
confirm.
4. Now you can choose between “
AUDI
” or “
RUN
”. “
AUDI
” is
sound active mode and “
RUN
” is the built-in program. Select the
mode that you want the fixture to run in and press ENTER.
5. Press MODE/ESC to return to the main menu.
RESE
MAIN MENU -
ALL
- When you activate the reset function, the fixture will
begin the reset motion.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
ALL
” is displayed.
4. Press ENTER to reset all motors, or press MODE/ESC to
cancel and return to the main menu.
SCAN
- When you activate this reset function, the fixture
will only reset the pan/tilt motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
SCAN
” is displayed.
4. Press ENTER to reset the pan/tilt motors, or press MODE/
ESC to cancel and return to the main menu.
COLR
- When you activate this reset function, the fixture
will only reset the color wheel motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
