8
diagram 20b
diagram 21
GP
GP
GR
glass panel
glass panel
pan
threshold
glass panel
glass panel
inside
shower
¼" gap
¼" gap
note: measurements taken from outside edges of glass
¼" gap
3/8" door to pan
threshold clearance
shower pan
top of shower pan threshold
glass panels
GP
GD
GP
P
diagram 21a
glass channel
center section
side section
side section
diagram 22
inside
shower
Side View of Header
diagram 23
E
- Dry Fit Door/Header
The door can pivot with the hinges on the left or right side depending on your
preference. We will illustrate an installation with the hinges on the right side.
1. Have one person place the door in its open position by allowing the bottom
hinge pin to slide into the threshold hinge bracket
.
Make sure the bottom
hinge has the spacer on the pin.
GP
GD
diagram 20a
Be sure to keep the door in a vertical position. If the door is not
kept vertical, damage to the hinge, glass, or pan may occur.
D - Install Threshold Hinge Bracket.
Next, Install Threshold Hinge Bracket. (dia. 15). Decide what side do you want the door
to open, left or right? Place bracket into notch of pan threshold step and tight to the
glass panel. Use 1/8-inch drill to pre-drill screw holes. screw in the two screws.
Apply
silicon and place bracket on top, then insert and tighten screws.
diagram 15
