Installation and Operating Instructions
Rev 01
Plastic fluted grab rail with concealed fixings
Plastic Fluted Grab Rail 305mm
Plastic Fluted Grab Rail 460mm
Plastic Fluted Grab Rail 610mm
Plastic Fluted Grab Rail 915mm
PFGB 12/XX
PFGB 18/XX
PFGB 24/XX
PFGB 36/XX
Available colours:
WHITE (WH). ELECTRIC BLUE (EB). DARK BLUE (DB). YELLOW (YE). RED (RD).BLACK (BL).
GREEN (GR). BROWN (BR). GREY (G
Y
).
Congratulations on the purchase of your grab rail. This grab rail has been designed for general
domestic indoor use to give users extra support while moving from one position to another. It
provides support and assists with the independent standing and sitting of persons.
Warnings:
Due to manufacturing tolerances we do not
recommend pre-drilling fixing holes before physically
receiving this product.
On receiving delivery of this product, a thorough
check must be carried out and any defects
immediately reported. The product must be stored in
a dry place and not stacked under other equipment.
The wall on which the rail is installed must be flat
and capable of taking the load.
Installation must be carried out by a qualified
tradesman using suitable fixings for the wall substrate.
Improper installation / use can cause accidents and
injuries.
Do not use countersunk fixings.
• Never alter the fixing holes as this could affect the
strength and integrity of the product.
• Do not over-tighten fixings.
• This rail has been tested with a static load of 200kg
giving a max rated load of 130kg
• After installation a functional test must be carried
out prior to use.
• These instructions should be retained by the user of
the product for its whole life.
• This rail should not be subjected to impact.
• This rail is designed to offer support to the user and
should not be used in a way that would apply the
users’ full weight to the rail.
• Do not use the grab rail for any purpose other than
that for which it was designed.
