©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 33
Press the OUT button (
11
) to set
the ending point for your LOOP
(
Figure 18
). The IN and OUT
buttons will stay lit indicating a
LOOP is playing. Press the OUT
button again to cancel the Loop.
Figure 18
Press the Reloop button (
11
) to
reactivate the loop. Press the
OUT button (
11
) to deactivate
the loop.
Figure 19
Press the OUT button (
11
) again when you reach your new ending point (
Figure 18
).
For a shorter Loop
: Press the OUT button (
11
) at sooner point in the track (
Figure 18
).
For a longer Loop
: Press the OUT button (
11
) at later point in the track (
Figure 18
).
L
OOP
E
DITING
The UCD-200 allows you to edit loops on the fly by pressing the IN and OUT buttons. By
pressing the IN button at your desired point you can move your loop "in" point forward.
Pressing the OUT button will exit the loop.
You can also edit the loop by pressing the Reloop button. Press this button for about 2
seconds, the LCD screen will display the time of your "out" point. You can now use the Jog
Wheel to fine tune your loop and "out" point. Turning the Jog Wheel clockwise will move
your "out" point forward, lengthening your loop. Turning the Jog Wheel counter-clockwise
will move your "out" point backwards, shorting your loop.