©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 17
F
UNCTIONS AND
C
ONTROLS
R
EMOTE
C
ONTROL
–
F
RONT
C
ONTROLS
Figure 3
(1) OPEN/CLOSE (Disc Tray Open/Close)
– This button is used to open and close the disc
transport tray door.
NOTE:
When a disc is loaded, the tray will not open unless the unit is in
pause or cue mode.
(2) SOURCE SELECTOR
– Press this button to select your desired playback source. Select CD
player, USB 1, or USB 2. The source indicator LED will light when the selected source is
activated.
(3) TIME
– The TIME button is used to change the displayed time values. Time can be
displayed as
Elapsed Track Time
,
Remaining Track Time
, and
Total Disc Remaining Time
.
Total Disc Remaining Time
can only be displayed for standard CDs.
(4) LIQUID CRYSTAL DISPLAY (LCD)
– This high quality LCD indicates all the functions (play,
pause, cue, etc.,), as they occur. This display is viewable at several comfortable angles as
described later. The LCD icons will be described in the next section.
(5) PITCH SLIDER
– This slider is used to adjust the playback pitch percentage when the Pitch
(
8
) function is activated. The slider is a set adjustment and will remain set until the pitch
slider is moved or the Pitch (
8
) function has been turned off. The maximum pitch range of
the slider is +/-100%. This adjustment can be made with or without a music source. The pitch
adjustment will remain even if a music source has been removed, and will reflect on any
other music source that is loaded into the unit. That is to say, if you set a +2% pitch on one
music source, remove it and insert another, that music source will also have a +2% pitch. The
amount of pitch being applied will be displayed in the LCD (
4
). Use this slider to match the
BPM’s of this unit to that of another music source. By changing the pitch of one music source
with respect to the other in this way, the beats can be matched.
