©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 18
(6) SGL/CTN
– This button allows the unit's play mode to change between
Single
and
Continuous
mode. In single mode the unit will play a single track and return to cue mode. In
continuous mode the unit continues to play track by track.
(7) TAP/BPM BUTTON
– Press this button to switch between manual BPM and Auto BPM.
When in manual BPM mode, tap this button to the beat of the current track.
(8) PITCH BUTTON / PITCH PERCENTAGE SELECTOR
– This button is used to turn the pitch
function on and off and choose the pitch percentage. The pitch percentages to choose from
are 4%, 8%, 16%, and 100%. To activate the pitch slider, press the button for at least 3
seconds. The pitch functions of the Pitch Slider (
5
) will not function without this function
being activated. The pitch slider and "+" and "-" pitch bend buttons have a maximum range
of +/-100%. (100% Pitch Bend/Pitch Slider works with CD only)
(9) TRACK/FOLDER SEARCH KNOB
– This knob is used to search/scroll through the tracks or
folders on an active audio source. The search feature depends on the setting of the
Folder
button. If you press the knob in and turn it while in track mode, you can skip ahead 10
tracks.
Example
: if you are at Track #1, pressing the knob and turning it clockwise will skip
you to Track #11. If you press the knob and turn it clockwise again, it will skip to Track #21. If
there are not that many tracks, it will go back to Track #1.
(10) FOLDER/TRACK BUTTON
– This button is used to toggle between folders and tracks.
When the LED of the
Folder
button is lit, the player is in Folder Search mode. Hold the
Folder
button down for at least 2 seconds to activate and deactivate the repeat function.
REPEAT ON
: All the track in the current folder will play track by track until the
Repeat
function is deactivated.
REPEAT OFF
: All the tracks in the device will play in the normal mode.
SINGLE REPEAT
: The current playing track will play continuously.
(11) IN, OUT, & RELOOP
IN BUTTON
– “CUE ON THE FLY” - This function allows you to set a Cue Point without
music interruption (“on the fly”). This button also sets the starting point of a loop.
OUT BUTTON
– This button is used to set the ending point of a loop. A loop is started by
pressing the
IN
button, pressing the
OUT
button sets the loop ending point. The loop will
continue to play until the
OUT
button is pressed once again.
RELOOP BUTTON
– If a loop has been made, but the player is not actively in loop mode
(a loop is not playing), pressing the
Reloop
button will instantly reactivate the loop
mode. To exit the loop, press the
Loop Out
button.
