©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 28
L
OADING
USB
D
EVICE
The UCD-100 can only read SDHC (High Capacity) Cards up to 32GB. The file format is MP3
only. When connecting a USB stick, USB card reader, or external hard drive, make sure you
are correctly lined up with the USB port and gently insert the USB connection. To disconnect
a USB drive, stop playback and “pull out” the USB connection.
CAUTION:
Never remove a USB device while in PLAY mode.
S
ELECTING
Y
OUR
A
UDIO
S
OURCE
Select your desired audio source using the Source Selector button (
2
). This button lets you
toggle between the CD player, USB port 1 and USB port 2. The LED's will verify which source
is active.
The different sources can only be selected while in Pause mode.
S
ELECTING
T
RACKS
Select a desired track by using the Track knob (
9
). Rotate the Folder/Track button (
9
)
clockwise to select the next track, or rotate the knob counter-clockwise to select the
previous track. You may turn and hold the Track knob (
9
) to change tracks continuously at a
higher speed.
When you are using the knob to select a new track during playback (a track already playing)
the new track you selected will immediately begin playback as soon as the search operation
is completed.
S
TARTING
P
LAYBACK
Pressing the Play/Pause button (
16
) with a music source device activated will immediately
start playback. The point at which playback starts (cue point) will automatically be stored in
the memory as cue point. The unit will return to this cue point (the point at which playback
started) when the Cue button (
17
) is pressed.
Pausing temporarily stops playback. Pressing the Play/Pause button (
16
) changes the
operating mode between play and pause.
