©American Audio® www.americanaudio.eu UCD-200™ User Manual Page 19
(12) RELAY BUTTON
– This button activates Flip-Flop™ mode.
(13) PITCH BEND BUTTONS
(-) PITCH BEND
– The (-) pitch bend function creates a momentary “Slow Down” in the
pitch speed (Beats per minute - BPM) when the Pitch (
8
) function is activated. This
function allows the beats between two CD’s or any other music source to match. This is
a momentary function. When the button is depressed the pitch speed will automatically
return to the Pitch Slider's (
5
) selected pitch. Holding down this button will give a
maximum of -100% pitch. Be sure to remember that this function is a momentary pitch
adjustment, for a more precise adjustment use the Pitch Slider (
5
) to match the BPM’s
with another playing music source.
(+) PITCH BEND
– The (+) pitch bend function creates a momentary “BUMP” in the pitch
speed (Beats per minute - BPM) when the Pitch (
8
) function is activated. This function
allows the beats between two CD’s or any other music source to match. This is a
momentary function. When the button is depressed the pitch speed will automatically
return to the Pitch Slider's (
5
) selected pitch. Holding down this button will give a
maximum of +100% pitch. Be sure to remember that this function is a momentary pitch
adjustment, for a more precise adjustment use the Pitch slider (
5
) to match the BPM’s
with another playing music source.
(14) TEMPO LOCK FUNCTION
– This button activates the Tempo Lock function. This
function allows you to use the Pitch Slider to speed up or slow down playback speed
without altering the tonal pitch of the track. When this function is not engaged the
original tonal pitch of the track will be altered giving you the "chipmunk" effect when a
track is played at a high rate of speed or the "James Earl Jones" effect when a track is
slowed too much.
(15) SEARCH BUTTONS
This search button allows you to quickly scan backwards through a track.
This search button allows you to quickly scan forwards through a track.
(16) PLAY/PAUSE BUTTON
– Each press of the Play/Pause button causes the operation to
change from play to pause or from pause to play. While in play mode, the green play LED will
glow, and while in pause mode, the green play LED will flash.
(17) CUE
– Pressing the CUE button during playback immediately pauses playback and
returns the track to the last set cue point. The red Cue Button LED will glow when the unit is
in cue mode. The LED will also flash every time a new Cue Point is set. The CUE button can
also be held down to momentarily play music. When you release the CUE button it instantly
returns to the last set Cue Point.
