©American Audio® - www.americanaudio.eu Encore2000™ User Manual Page 30
(47) CUE Indicator
– This indicator will glow when the unit is in
CUE
or
Pause
mode and will
flash every time a new cue point is set.
(48) Folder Indicator
– This indicator details the current selected folder.
(49) Time Bar Indicator
– This bar gives a visual approximation of a track's or disc's
remaining time. This bar will begin to flash when a CD or song is ending. The line below the
time bar indicator is the buffer indicator, each bar represents 2 seconds.
(50) Time Display
– These indicators detail the minutes, seconds, and frames. The meter will
display either the elapsed or remaining time of a track.
(51) Auto BPM Icon & Meter
– When the
Auto BPM Icon
is lit, it is indicating that the
Auto
BPM Meter
is active. The meter will measure the beats per minute (BPM).
(52) Pitch Meter
– This meter will display the pitch percentage applied by the
Pitch Slider (5)
or
Pitch Bend Buttons (10)
.
(53) Lock Indicator
– Appears and flashes when the lock mode is activated. See chapter Lock
Mode on page 45 for
Lock Mode
.
(54) Loop
– This icon will appear when a loop point is set.
(55) Reloop Indicator
– Appears and flashes when a
Loop
is active.
(56) Auto CUE
– This will indicate if the
Auto CUE
is
On
or
Off
. Press and hold the
SGL/CTN
Button (4)
for 1 second to turn the
Auto CUE
function on and off.
(57) Key Indicator
– This indicator will glow when the touch sensor part of the jog wheel has
been touched.
(58) Character Display
– This will display the name of the track, folder, and album when a
MP3 disc is loaded.
(59) Elapsed/Total Remain/Remain Indicator
– This indicator is in direct reference to the
Time Display (50)
. When the
Elapsed
indicator is displayed in the
LCD (20)
, the time defined
will refer to a single track's elapsed time. When
Remain
is indicated in the
LCD Display (20)
,
the
Time Display (50)
in the LCD will define the current track's remaining time. When
Total
Remain
is indicated in the
LCD Display (20)
the
Time Display (50)
in the LCD will define the
total disc remaining time (for CD only). The time mode is changed by the tapping on the
Time Button (3)
.
(60) Repeat Indicator
– This indicates that the repeat function is activated. When the repeat
function is activated, the current track playing will repeat itself until the
Repeat
function is
deactivated.
