©American Audio® - www.americanaudio.eu Encore2000™ User Manual Page 25
(20) LCD Display
– This high quality LCD display indicates all the various functions, as they
are occurring. This display is viewable at several comfortable angles (see chapter 9.4
Mounting on page 20. The display icons will be explained in chapter 10.5 LCD Display Panel
on page 29.
10.2
M
IXER
C
ONTROLS
(21) Source Selector Switch
– These switches are used to select the input source assigned to
each channel. Each channel may only be assigned one input source at a time.
Note
: When
using deck output mode, switching to deck will route the deck source to the mix.
(22) AUX Input
– This Aux input is for the use of a MP3 player. Input volume will be
controlled by the
Channel 2 Fader
.
(23) Channel Gain Control
– This adjustment is used to adjust an audio source signal input
gain for a channel. Never use the gain control to adjust output volume. Setting the gain level
properly will ensure a clean output signal. To properly set the gain level controls:
