©
American Audio
®
- www.AmericanAudio.us - Encore 1000 Instruction Manual Page 22
BASIC OPERATIONS (CONT.)
REPLAY LOOP
- The RELOOP function allows you to return to your stored
loop at any time. The IN BUTTON (10) and OUT BUTTON (10) LEDs will indicate
a loop is stored in memory, and may be played at any time. To replay the loop,
press the RELOOP BUTTON (10). The IN BUTTON (10) and OUT BUTTON (10)
LEDs will again begin to flash indicating SEAMLESS LOOP mode has been
activated and your loop will immediately begin to play.
Figure 21
10. CHANGING THE TIME DISPLAY (44)/TIME BAR (43):
DURING NORMAL PLAYBACK, pressing the TIME BUTTON (3), will change the
time display information in the LCD (16). The following is a break down of the
time settings and their definitions:
1) REMAIN - This details the time in the LCD (16) as the current tracks’ remain-
ing running time.
2) ELAPSED - This details the time in the LCD (16) as the current tracks’
elapsed running time.
3) TOTAL REMAIN - This details the time in the LCD (16) as the current CD total
remaining running time (this is for CDs only).
TIME BAR INDICATOR - This details the time defined in the TIME METER (44) as a visual bar icon. As with
the TIME METER (44) this bar is also dependent on the selected time function [REMAIN, ELAPSED, OR TOTAL
REMAIN (CD ONLY)]. This bar will begin to flash when a track is ending regardless
of which time func
t
i
on you
are in. Use the flashing bar as a visual reminder that a track is ending.
MEMORY STATUS INDICATOR - The memory status indicator is the thin line bar that is located underneath
the TIME BAR INDICATOR (43). The memory status is represented by the line bar being filled or emptied. The
first bar in the line bar represents 5 seconds of cue memory buffer. And following bars each represents 1 sec-
ond of play memory buffer.
Figure 22
