©
American Audio
®
- www.AmericanAudio.us - Encore 1000 Instruction Manual Page 17
INTERNAL MENU
Hold TIME BUTTON (3) for 3 seconds to enter the internal menu. Use the TRACK BUTTONS (15) or turn
the JOG WHEEL (9) to scroll through the different menus and press the +10 BUTTON (15) to enter the cor-
responding submenu. Press the TRACK BUTTONS (15) or turn the JOG WHEEL (9) to change the submenus
and press TIME BUTTON to memorize your settings in any operating mode and exit the menu.
1. Sensitivity – Touch Wheel Sensitivity Adjustment (Adjustment range is -20~+20.)
Increase or decrease the sensitivity of the Jog wheels touch sensor. The lower the sesitivity level the more
pressure the JOG WHEEL needs.
2. Pitch Bend - Pitch range +/-1%~100%
3. CF Curve - Cross Fader Curve 0~50
4. Sleep Time – No sleep, 5~120 min
Set the time the player takes to enter sleep mode. When in sleep mode, the player will either read CD SLEEP
or ZZZZZ on the LCD screen.
5. Line Setup – MODE= 1~3(Line mode)
- Dis=0.5~12.0 sec. (LINE NAME start/stop time adjustment)
- Spd=50~2000 msec. (LINE NAME speed time adjustment)
6. Bit rate – Display ON/OFF
Display the bit rate of MP3 files.
7. Version – CON: VerXX (Control version)
- SER: VerXX (Servo version)
- DSP: VerXX (DSP version)
Displays the firmware version. The firmware is tested to ensure that the Encore 1000 is free of defects. If
updates are released they will be posted on the American Audio website.
8. Load Default – Press TRACK Knob to enter load defaults. (LCD displays “Load OK”.)
Will reset all settings to factory default except for Firmware version.
9. Exit & Save – Exit & Save setting to next power on (LCD displays “Saving”.)
This will save all changes if changes are not saved the unit will revert to last saved changes on power off.
Press the TRACK knob to fast exit & save in any operating mode.
NOTE:
SLEEP TIME: The CD player automatically shuts off the transport and laser after about 15 minutes when in
pause or cue mode). This extends the life of your motor drive and laser. During sleep mode the display
shows the word “SLEEP”. To wake up the player, just press the cue or play button, the display turns to
normal and is ready to receive instructions. You can enter the Sleep Time menu to adjust sleep time, range
is 5~120 minutes.
Calibrating the JOG WHEEL touch sensor:
Before you power on the Encore 1000 hold down the PITCH PERCENTAGE BUTTON (7) till the display reads
A / D=255-2XX, now release the PITCH PERCENTAGE BUTTON (7) and the calibrated value will be saved.
Note: When calibrating the Jog Wheel, please avoid touching the Jog Wheel.
