©
American Audio
®
- www.AmericanAudio.us - Encore 1000 Instruction Manual Page 21
BASIC OPERATIONS (CONT.)
2) Press the IN BUTTON (10). This will set the starting point of the
SEAMLESS LOOP. The IN BUTTON (10) LED will light.
1) Press PLAY/PAUSE BUTTON (11) to activate playback
mode.
Figure 18
Figure 17
3) Press the OUT BUTTON (10) to set the ending point for your LOOP
(Figure 19). The IN BUTTON (10) and OUT BUTTON (10) LEDs will
immediately begin to flash rapidly, indicating the SEAMLESS LOOP
mode has been activated.
LCD LOOP INDICATORS
- During a loop, the RELOOP INDICATOR
(49) will flash in the LCD DISPLAY (16) indicating a loop is active.
EXITING A LOOP
- To exit a SEAMLESS LOOP, press the OUT
BUTTON (10). Music playback will resume normal play. The IN BUT-
TON (10) and OUT BUTTON (10) LEDs will remain lit to remind you
that a loop is in memory.
Figure 20
Figure 19
9. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a disc.
