PITCH ADJUSTMENTS
Figure 29
3. JOG WHEEL (9):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode.
Rotating the wheel in a clockwise direction will increase your track pitch and
rotating the wheel in a counter-clockwise direction will slow your track pitch.
The speed you rotate the JOG WHEEL will determine pitch bend percentage
(%). For example, if the JOG WHEEL is continuously turned in a counter-
clockwise direction the playback speed will steadily decrease and will con-
tinue to decrease until playback reaches a maximum of -100% and playback
stops entirely. When you stop turning the JOG WHEEL the disc speed will
automatically return to it’s previous set speed.
©
American Audio
®
- www.AmericanAudio.us - Encore 1000 Instruction Manual Page 25
This feature is a kind of “auto pilot”. When you are using the Encore 1000 system, you can have one player
begin playback when the other ends. You can RELAY single tracks, the entire disc, or a combination of the two.
This feature is sometimes referred to as Flip-Flop playback.
To RELAY single tracks:
1 By default the two players are set to playback in single mode, SINGLE (56) will be indicated in the LCD
(16).
2) Load your two players with audio discs and press the RELAY BUTTON (23). The crossfader does not have
to be in the center position, in RELAY mode the crossfader is disabled.
3) After they have both cued, press the PLAY/PAUSE BUTTON (11) on one player to begin playback.
4) After the first player’s single track has ended the second player’s track will immediately begin playback.
5) FLIP-FLOP™ will continue until you stop it, power is interrupted, or you switch to an outboard audio
source.
To RELAY entire CDs:
Be sure your players are both in continuous play mode, make sure SINGLE MODE (56) does not appear in the
LCDs (16) of both players. Follow all directions for single track relay above. When one player’s disc ends the
other player will immediately begin playback.
Note:
You may combine relay single and continuously playback modes by selecting either single or continuous
playback on your units. In RELAY mode the decks are set single play mode by default.
Make sure that neither deck has REPEAT mode activated during RELAY mode. REPEAT mode has priority over
RELAY mode.
RELAY PLAYBACK
LOCK MODE
In this mode you are able to lock the player functions of the Encore 1000 so that there are no accidental mis-
takes. The mixer functions will not be locked so that adjustments can be made to the audio levels. To lock
the player functions please follow the directions below.
1. To lock the Encore 1000 player press the RELAY BUTTON (23) for at least 3 secs. When the Encore 1000
is locked the RELAY BUTTON (23) and the LOCK INDICATOR (47) will flash.
2. To unlock the Encore 1000 press the RELAY BUTTON (23) for at least 3 secs.
NOTE RELAY MODE: Activate RELAY MODE first, then "LOCK" the Encore 1000.
