15.
This product is equipped with a polarized alternating-
current line plug ( a plug having one blade wider than the
other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Grounding and Polarization
16.
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such powerlines
or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching
such power lines or circuits as contact with them might
be fatal.
Power Lines
17.
Do not overload wall outlets,extension cords, or integral
convenience receptacles as this can result in a risk of
fire or electric shock.
Overloading
18.
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the product.
Object and Liquid Entry
19.
When replacement parts are required,be sure the
service technician has used replacement parts specified
by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.
Replacement Parts
20.
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
Safety Check
21.
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI / NFPA70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See figure below.
Outdoor Antenna Grounding
14.PowerSources
Product should be operated only from the type of power
source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult
your product dealer or local power company.
1.
All the safety and operating instructions should be read
before the product is operated.
Read Instructions
2.
The safety and operating instructions should be retained
for future reference.
Retain Instructions
3.
All warnings on the product and in the operating
instructions should be adhered to.
Heed Warnings
4.
All operating and use instructions should be followed.
Follow Instructions
5.
Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
Attachments
6.
Unplug this product from the walloutlet before cleaning.
Do not use liquid cleaners or aerosol cleaners.Use a dry
cloth for cleaning.
Cleaning
7.
The appliance should be situated so its location does not
interfere with its proper ventilation.For example, the
appliance should not be situated on a bed,sofa,rug,or
similar surface that may block the ventilation slots.
Ventilation
8.
The appliance should be situated away from heat
sources such as radiators, heat register, stoves, or other
apparatus (including amplifiers) that produce heat.
Heat
9.
Do not use this unit near water. For example, neara
bathtub or in a wet basement and the like.
Water and Moisture
10.
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them,paying particular attention to
cords at plugs, convenience receptacles, and point
where they exit from the appliance.
Power-cord Protection
11.
To protect your product from a lightning storm, or when it
is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna
or cable system. This will prevent damage to the product
due to lightning and power-line surges.
Lightning
12.
The product should be used only with a cart
or stand that is recommended by the
manufacturer.
Carts and Stands
13.
An applicance and cart combination should be moved
with care.Quick stops,excessive force and uneven
surfaces may cause the appliance and cart combination
to overturn.
A.
4
SAFETY I N
STRUCTIONS
Before using the unit, b e s ure t o r ead all operating instructions carefully . P lease note t hat
these are general precautions and may not pertain to your unit.
