AMEC WideLink R150GE, User Manual

Page: 3 / 43

3
General Information
Manual Revision: Version 1.0
i. Copyright
The entire contents of this instruction manual, including any future updates,
revisions, and modifications, shall remain the property of AMEC at all times.
Unauthorized copies or reproduction of this manual, either in part or whole, in
any form of print and electronic media, is prohibited. The contents herein can
only be used for the intended purpose of this manual.
ii. Disclaimer
AMEC is devoted to publish and maintain this product manual. As we continue
to improve our AIS products to satisfy all customers’ needs, information in this
document is subject to change without notice. AMEC does not make any
representations or warranties (implied or otherwise) regarding the accuracy and
completeness of this document and shall in no event be liable for any loss of
profit or any commercial damage, including but not limited to special, incidental,
consequential, or other damage.
iii. Product Category
This product is categorized as “protected” in accordance with the requirements
as defined in IEC 60945.
iv. Disposal Instruction
Do not dispose of this device with unsorted waste.
Improper disposal may be harmful to the environment and human health.
Please refer to your local waste authority for information on return and
collection systems in your area.
WARNING!
WARNING: The AIS receiver must be installed and configured in conformity with
the provided instructions in the manual in order to maximize the device
performance.
WARNING: Please bear in mind that not all vessels are equipped with AIS
transponders and therefore may not be visible to this receiver. Likewise, in the
event of overcrowded port traffic, vessels equipped with AIS transponder may not
be visible to this receiver.
WARNING: DO NOT DISASSEMBLE OR MODIFY THE EQUIPMENT. Improper
disassembly or modification could cause personal injury and will invalidate the
guarantee.
WARNING: While most of the installation can be performed by the owner or the
crew, a final commissioning can be done by your local agent/dealer when needed
or required. AMEC and the local agent/dealer will not bear any responsibilities
over any damages resulted from an improper installation by unauthorized
agent/dealer.