AMEC WideLink R150GE, User Manual

Page: 26 / 43

26
4.2.2 IP Settings
The IP Settings section displays the information on the WideLink R150GE network
settings, including current WideLink R150GE’s IP address, subnet mask, gateway, and
the method of obtaining the IP address (DHCP or fixed IP).
By default, the device is configured to assign the static IP address 192.168.2.1. You can
change the IP address by specifying the other static IP address for your network
deployment or obtaining an IP address from DHCP server on the network.
To review and configure the IP Settings:
1. Go to System Configuration

IP Settings. The IP Settings page appears.
2. Verify that the IP Network Setting is to obtain the IP address from DHCP
server or set to static IP address.
3. When the Specify and IP address is selected, you can change the following
settings:

IP Address: Assign an IP address for the device.

IP Subnet Mask: Specify the subnet mask for your network segment
deployment.

Default Gateway: This is the gateway IP address of the internet
interface.

Primary DNS: The IP address of the primary Domain Name System (DNS)
server.

Secondary DNS: The IP address of the secondary Domain Name System
(DNS) server.
4. Click Apply button to take effect the new settings, or Cancel button to revert
to the original settings.
Figure 21 IP Settings