AMEC WideLink R150GE, User Manual

Page: 21 / 43

21
3.2 Baud Rate Setting:
WideLink R150GE RS-232 and NMEA 0138 port baud rate is user selectable.
To adjust the values, set the desired baud rates for the RS-232 and NMEA and then click
on “Program Device” to apply the new the setting. The default is set at 38400 bauds.
Figure 15 Baud Rate
3.3 GPS Setting
An integrated GPS receiver is also built-in into WideLink R150GE. The integrated GPS
receiver allows positional data and AIS data to be output together. The GPS receiver is
enabled by default and it can be easily disabled by unchecking the “Enable Internal GPS
Module.”
Figure 16 Internal GPS