AMEC Camino-101 Class B AIS Instruction Manual Download Page 48

Page: 48 / 77

AtoN(Off position)

Color: Red / Plus Sign

The icon will be displayed if any AIS AtoN (Aids to Navigation) is in off

position status.

SAR

Color: Black

The icon will be displayed if any air plane is in the range of reception.

SART

Color: Red / Cross

The icon will be displayed if any SART message is sent out.

Base Station

Color: Green

The icon will be displayed when any base station is in the range of

reception.

NOTE: The straight line extended from AIS target represents the course of the ship.

4.3.1.2 Alphanumeric View

Under this mode, all ship details will be displayed alphanumerically. To browse the entire

information, please use the bar on the screen to help locating the desired data. (Figure 4-3-1-2)

Figure 4-3-1-2 Main Display

Summary of Contents for Camino-101 Class B AIS














































































Search results

Summary of Contents for Camino-101 Class B AIS

Reviews:

Related manuals for Camino-101 Class B AIS

Brands by name

Popular brands

AMEC Camino-101 Class B AIS, Instruction Manual

Search results

Summary of Contents for Camino-101 Class B AIS

Reviews:

Related manuals for Camino-101 Class B AIS

Brands by name

Popular brands