9
*NOTE: CAMINO-101 SUPPLIES ONLY 3.3V FOR GPS ANTENNA. WE RECOMMEND YOU
TO USE AMEC GPS ANTENNA (WHICH IS 3.3V) WITH CAMINO-101. IF A 5V GPS
ANTENNA IS CONNECTED TO CAMINO-101, IT MAY CAUSE A DETERIORATION
OF GPS RECEIVE PERFORMANCE.
Step 3:
II. Cabling Instructions
Step 1:
Connect the GPS cable
to the GPS ANT
*
5
Step 2:
Connect the VHF cable
to the VHF ANT .
6
Connect NMEA 0183
compatible system to the
NMEA interface .
4
Figure 2-2-2-3 Cabling instructions
GPS Antenna
Connector:
Female TNC
type
1
5
3
6
2
VHF Antenna
Connector: M Jack
Power
RS-232
NMEA 0183
Step 4:
Connect either RS-232
or Bluetooth antenna to
your computer if needed.
* DO NOT CONNECT
THE TWO
INTERFACES
SIMULTANEOUSLY.
Step 6:
Connect the Power cable
to the PWR .
1
Step 5:
Pairing Bluetooth to your
computer if needed.
(Please refer to 2-2-2-3).
4
Bluetooth (Optional)
Step 7:
Open the CAMINO-101by
switching to “ON”
7
7
