37
3.
You may also click on “
Connection
”→ “
Device Wizard
” to connect AIS with the AIS Viewer
easily.
Figure 4-2-2 Run AMEC AIS Viewer
Step 2:
Go to “
Config
”→
“CPA/TCPA”
to set the threshold value of CPA and TCPA
*
(Figure
4-2-3). Please refer to
Section 4.3.2.5 “CPA/TCPA”
for the details.
Figure 4-2-3 Run AMEC AIS Viewer
*NOTE:
(1)This function would be invalid without GPS data input.
(2)CAMINO-101 merely provides AIS data. Users may set up CPA/TCPA through
other maritime equipments: Chartplotter, Radar Plotter, or PC (through AMEC AIS
Viewer Program). For certain audio alarm, users should refer to your own
interfaces. PC and AMEC AIS Viewer Program DO NOT support any kind of audio
alarm.
After completing the steps above, you may start to use the AIS Viewer.
