- 46 -
(c)Windows 98 and ME
To run winipcfg, grab the Run item from the Start menu and type
winipcfg
into
the Open: box. Hit OK (or return). Those comfortable with DOS can launch
it
from a DOS prompt.
When
winipcfg
launches, you'll get a window like this one:
Now, hit the "Release" button and then hit "Renew". If all goes well, you'll get
new information, and it is for your DVR unit. Write down this information on
separate paper and input IP Address, Subnet Mask, and Default Gateway into
your DVR to which you want to access via IP network.
(d) Confirm if IP Address is working by executing ping command
Execute ping command with IP Address which you assigned to DVR unit, check
if it is successful before you try to access to DVR unit via IP network. If it is not
successful, you may not be able to access to DVR unit via IP network, and we
recommend you to get help from your network administrator.
