- 28 -
Basic display: Press MENU button repeatedly until you find menu item to set,
and select by pressing ENTER button. In basic display of MOTION SETUP,
green
Colored cell represent motion detection area.
CELL
ON(OFF)
Sets motion detection area cell by cell.
Using direction keys, select cell to set and press ENTER button. color of cell set is
changed to green.
BLOCK ON
BEGIN
Sets motion detection area by block(X*Y)
END
Using direction keys, select the first location of cell and press ENTER button,
and then select the second location of cell using direction keys and again press
ENTER button. you will see color of all cells inside 2 coordinates is changed to
green, motion detection area.
ALL
OFF(ON)
All cells are set as a detection area or no detection area.
When it is in all-off, press ENTER make all cells no detection area. when it is
in ALL-ON, press ENTER to make all cells detection area.
SENSITIVITY
LEVEL 10
Sets sensitivity of motion detection.
Using UP and DOWN buttons, choose sensitivity level.
LEVEL 01(Dull)
LEVEL 10(Sensitive)
DETECT WINDOW
NUMBER 01
Sets numbers of cells corresponding to size of motion.
Just in case numbers of cell detected(green colored) is more than set numbers,
motion is detected. If you set detect window number at bigger number, motion by
small object is not detected. Press UP and DOWN buttons to increase or decrease
cell number.
EXIT
To exit, press ENTER button.