- 12 -
3.6
HDD Connection
Connect main board and HDD using IDE HDD cable and power cable included
in the package. If you install just a unit of HDD, jumper setting of HDD MUST
BE ON mater, as specified by HDD manufacturer , and you can install it at any
location of HDD1 or HDD2.
In case you install 2HDD, HDD1 must be master and HDD2 is slave, and jumper
setting must be done properly as specified by HDD manufacturer.
Fix HDD on the bottom of DVR case using screws included in the package.
Screws must be inserted from outside of the bottom.
Notice:
Formatting before installation is not required, because DVR system
automatically detects HDD and formats. In the first operation after installation of
HDD, first clear all data on HDD and set at FACTORY DEFAULT in SETUP
menu of DVR system.
