- 13 -
3.7
Power connection
Connect DC 12V power to the power connection on the rear panel of DVR unit.
DC 12V
~
Selection of video system(NTSC/PJAL system)
You can set video system in the process of booing. according to video system of
camera, set video system as follows.
~
NTSC system: While you press MENU button and LEFT button at the same
time, turn DC power switch on. Press two buttons until you hear beep sound from
DVR unit.
~
PAL system: While you press MENU button and RIGHT button at the same
time,turn DC power switch on. Press two buttons until you hear beep sound from
DVR unit.
From next booting, it is not necessary to set as above .DVR system memorize video
setting. In the process of booting, DVR system displays ”VIDEO SYSTEM
SETTING TO NTSC(OR PAL)” on bottom of screen to inform you video system
you selected.
~
Turn on the power and log on the system
Follow direction of log-in part of this manual to input own password and start the
system. Just press enter button if you do not want to input own password.
~
Detail setup in system setup
Refer to system setup of this manual
Notice:
To connect HDD Bay to DVR unit, first turn off power to both DVR unit and
HDD Bay. then turn on power to HDD bay first and then DVR unit after more than
5 seconds.
