Chapter 1
Getting Started
Before you begin installing your new Infinity Fabric™ Link, visually inspect the bridge
and any components that may have shipped with it, and contact your AMD reseller in
the event of missing or damaged parts. Also make sure that you have the proper
system requirements and have reviewed the pre-installation information outlined in
this chapter.
1.1 Introduction
The MI100 accelerator supports the following Infinity Fabric™ link arrangement:
•
4 Piece (P/N: 102-D34601-00)
Figure 1–1 D34601 – D343 4P Infinity Fabric™ Link Arrangement
1.2 Recording the Serial and Part Numbers
Write down the serial number and part number before installing your product. The
serial number and 102 part number on the product are required for registration and
free support. They are located on a sticker on the back of your product.
©
2020
Advanced Micro Devices, Inc.
AMD Infinity Fabric™ Link
