Figure 2–1 Four-card Assembly
2.
Loose the retaining screws at the top of the bracket to allow each GPU to self-
center to the slots on the bridge board.
3.
Align the AMD Infinity Fabric™ Link interconnect bridge with the slots at the top
of the accelerators and carefully push the bridge board down until flush with
the first row of golden fingers.
Important:
Remember to use even pressure on each of the connectors.
4.
Using a Torx head screw driver, screw each of the eight screws in a
1-2-3-4-5-6-7-8 pattern. Use one half of a full screw rotation (180 degrees, -
clockwise) until the AMD Infinity Fabric™ Link interconnect bridge is fixed on
the tray.
5.
Finish tightening the retaining screws on the top of the PCIe card bracket.
4 Hardware Installation
AMD Infinity Fabric™ Link
©
2020
Advanced Micro Devices, Inc.