AMD Geode™ SC2200 Processor Data Book
259
Core Logic Module - SMI Status and ACPI Registers - Function 1
32580B
10
GPWIO2_STS.
Indicates if PME was caused by activity on GPWIO2.
0: No.
1: Yes.
Write 1 to clear.
For the PME to generate an SCI:
1)
Ensure that GPWIO2 is enabled as an input (I/O Offset 15h[2] = 0).
2)
Set I/O Offset 12h[10] = 1 and I/O Offset 0Ch[0] = 1. (See Note 2 in the general description of this
register above.)
If I/O Offset 15h[6] = 1 it overrides these settings and GPWIO2 generates an SMI and the status is reported in
00h/02h[0].
9
GPWIO1_STS.
Indicates if PME was caused by activity on GPWIO1.
0: No.
1: Yes.
Write 1 to clear.
For the PME to generate an SCI:
1)
Ensure that GPWIO1 is enabled as an input (I/O Offset 15h[1] = 0)
2)
Set I/O Offset 12h[9] = 1 and I/O Offset 0Ch[0] = 1. (See Note 2 in the general description of this
register above.)
If I/O Offset 15h[5] = 1 it overrides these settings and GPWIO1 generates an SMI and the status is reported in
00h/02h[0].
8
GPWIO0_STS.
Indicates if PME was caused by activity on GPWIO0.
0: No.
1: Yes.
Write 1 to clear.
For the PME to generate an SCI:
1)
Ensure that GPWIO0 is enabled as an input (I/O Offset 15h[0] = 0).
2)
Set I/O Offset 12h[8] = 1 and I/O Offset 0Ch[0] = 1. (See Note 2 in the general description of this
register above).
If I/O Offset 15h[4] = 1 it overrides these settings and GPWIO0 generates an SMI and the status is reported in
00h/02h[0].
7
Reserved.
Must be set to 0.
6
USB_STS.
Indicates if PME was caused by a USB interrupt event.
0: No.
1: Yes.
Write 1 to clear.
For the PME to generate an SCI, set I/O Offset 12h[6] = 1 and I/O Offset 0Ch[0] = 1. (See Note 2 in the
general description of this register above.)
5
THRM_STS.
Indicates if PME was caused by activity on THRM#.
0: No.
1: Yes.
Write 1 to clear.
For the PME to generate an SCI, set I/O Offset 12h[5] = 1 and I/O Offset 0Ch[0] = 1, (See Note 2 in the
general description of this register above.)
4
SMI_STS.
Indicates if
PME was caused by activity on the internal SMI# signal.
0: No.
1: Yes.
Write 1 to clear.
For the PME to generate an SCI, set I/O Offset 12h[4] = 1 and I/O Offset 0Ch[0] = 1. (See Note 2 in the
general description of this register above.)
Table 6-34. I/O Offset: ACPI Support Registers (Continued)
Bit
Description
Summary of Contents for Geode SC2200
