Display
Configuration
Connector(s) Used
Comments
DisplayPort
display
DisplayPort
connector
DFP (digital flat-
panel) display
DVI connector with
DVI-to-DisplayPort
adapter
HDMI display
HDMI connector
with HDMI-to-
DisplayPort adapter
An HDMI-to-DisplayPort adapter can be
used to transfer the video signal to an
HDMI display, but audio must be
transferred using a different cable
because the DisplayPort does not
transfer the audio signal.
Note:
HDMI adapters are not
included in your ATI FireMV 2260
package.
Note:
The ATI FireMV 2260 graphics card does not support VGA displays.
Using Adapters
Your ATI FireMV graphics card includes adapters to enable you to attach display
types other than those included on the baseplate.
Use the following instruction to attach a display with an adapter.
1.
Turn off your computer and monitor.
2.
Plug the adapter into the connection on your ATI FireMV graphics card and
tighten the thumbscrews (if there are any).
3.
Connect your display's cable to the adapter and tighten the thumbscrews (if
there are any).
4.
Turn on your monitor first, then your computer.
Use the ATI Catalyst Control Center to configure the new monitor.
7
©
2008
Advanced Micro Devices, Inc.
ATI™ FireMV™ 2260
Summary of Contents for ATI FireMV 2260
