43
5.2.3.1.2 Video Tamper
This tab allows the user to modify video tamper settings. Below is a screenshot of the Video Tamper tab:
Below is an explanation of the fields on the Video Tamper tab:
•
Enable
: This checkbox enables a video tamper alarm for the camera.
•
Working Period
: Clicking this button opens a weekly schedule that can be used to set times.
o
Click and drag to set video tampering for certain days of the week. Also, periods of video tampering can
be set for each day and enabled using the period settings on the bottom half of the screen. There are a
total of 6 periods that can be set.
•
Record
: This checkbox allows the user to enable the camera to record video when a video tampering alarm is
triggered.
•
Record Delay
: his field specifies in seconds how long the delay between alarm activation and recording should
be.
•
Relay Out
: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the
alarm port on the back of the camera) when a motion detection alarm is triggered.
•
Alarm Delay
: This field specifies in seconds how long the delay between alarm activation and Relay alarm
activation should be.
•
Send Email
: This checkbox allows the user to enable the camera to send an email when a video tampering alarm
is triggered.
•
PTZ
: This feature is not available on Amcrest POE Bullet Cameras.
•
Snapshot
: This checkbox allows the user to enable the camera to take a snapshot when a video tampering alarm
is triggered.
Summary of Contents for IP8M-2496E
Page 1: ...1 IP8M 2496E User Manual...
Page 51: ...51...
