5.2
36
•
Recipients:
This field allows the user to enter the receiver email address. These email addresses are the ones
that will receive any emails pertaining to alert and alarm emails sent by the camera. Up to 3 email addresses
can be entered in this field.
•
Interval:
This field allows the user to define, in seconds, how long the system should wait between sending
emails. This prevents multiple emails from being sent out.
•
Keep Alive:
This checkbox allows the user to enable a function to periodically check in with the SMTP server
to ensure it can connect correctly.
•
Email Test:
This button causes the system to automatically send out an email to test the connection is OK or
not. Prior to the email test, please save the email setup information.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save
the settings, click the Save button.
.2.7 UPnP
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet. In the
case of this camera, it allows the camera to connect to the router in an easy manner to quickly allow for remote
access. Below is a screenshot of the UPnP settings screen:
Below is an explanation of fields on the UPnP settings screen:
•
Enable
: This checkbox allows the user to enable the UPnP function.
•
Router State
: This field shows the UPnP status and has two options:
o
Unknown
: This means that UPnP
mapping has failed.
o
Successful
: This means that UPnP mapping has succeeded.
•
Port Mapping Lis
: This table is used to show how the ports for each protocol listed below have been
remapped by the UPnP protocol.
o
The first column shows the checkboxes to enable the corresponding service on the table.
o
The
second column shows the name of the services. To edit this, double click on the service line item.
Summary of Contents for IP8M-2496E
Page 1: ...1 IP8M 2496E User Manual...
Page 51: ...51...
