24
Below is an explanation for each of the fields on the Configuration tab in the Configuration menu item:
•
Profile
: This dropdown box allows the user to select which profile to modify. The 3 options are Day, Night, and
Normal.
•
Brightness
: This slider is used to adjust playback and recorded video window brightness. The value ranges
from 0 to 100. The default value is 50. The larger the number, the brighter the video is. When you input the
value here, the bright section and the dark section of the video will be adjusted accordingly. You can use this
function when the whole video is too dark or too bright. Please note the video may become hazy if the value is
too high. The recommended value ranges from 40 to 60.
•
Contrast
: This slider is used to adjust playback and recorded video window contrast. The value ranges from 0
to 100. The default value is 50. The larger the number is, the higher the contrast is. You can use this function
when the whole video brightness is OK but the contrast is not correct. Please note the video may become hazy
if the value is too low. If this value is too high, the dark section may lack brightness while the bright section
may over expose. The recommended value ranges from 40 to 60.
•
Saturation
: This slider is used to adjust playback and recorded video window saturation. The value ranges
from 0 to 100. The default value is 50. The larger the number, the stronger the color is. This value has no effect
on the general brightness of the whole video. The video color may become too strong if the value is too high.
For the grey part of the video, distortion may occur if the white balance is not accurate. Please note the video
may not be clear if the value is too low. The recommended value ranges from 40 to 60.
•
Sharpness
: This slider is used to adjust the sharpness of the video. The value ranges from 0 to 100. The larger
the value is, the clearer the edges are and vice versa. Note: The higher the value, the higher likelihood of
picture noise occurring. The default value is 50 and the recommended value ranges from 40 to 60.
•
Gamma
: This slider is used to adjust the gamma of the video. The larger the number, the brighter the video is.
The default value is 50 and the recommended value ranges from 40 to 60.
•
Anti-Flicker
: These radio buttons allow the user to select what type of anti-flicker technology should be used
for the video feed. The three options are 50 Hz, 60 Hz, and Outdoor. The desired option should offset any
flickering effect caused by the electrical current used in the specific area.
Summary of Contents for IP8M-2496E
Page 1: ...1 IP8M 2496E User Manual...
Page 51: ...51...
