36
Click and drag to set video tampering for certain days of the week. Also, periods of video tampering can be set for
each day and enabled using the period settings on the bottom half of the screen. There are a total of 6 periods that
can be set.
Record
: This checkbox allows the user to enable the camera to record video when a video tampering alarm is
triggered.
Record Delay
: This field specifies in seconds how long the delay between alarm activation and recording should be.
Relay Out
: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the
alarm port on the back of the camera) when a video tamper alarm is triggered.
Alarm Delay
: This field specifies in seconds how long the delay between alarm activation and Relay alarm
activation should be.
Send Email
: This checkbox allows the user to enable the camera to send an email when a video tampering alarm is
triggered.
Snapshot
: This checkbox allows the user to enable the camera to take a snapshot when a video tampering alarm is
triggered.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
Audio Detection
This menu allows the user to modify audio detection settings. Audio detection allows the camera to send event
notifications once audio detected by the camera exceeds a specified threshold. Below is a screenshot of the Audio
Detection screen:
