64
Record:
This checkbox allows the user to enable the camera to record video when an IVS event is triggered.
Record Delay
: This field specifies, in seconds, how long the delay between IVS events should be. The default is 10
seconds however this can be modified between 10~300 seconds.
Relay-Out:
This checkbox allows the user to enable a third-party external alarm if one is connected to the dongle
wires on the device.
Alarm Delay:
This field specifies, in seconds, how long the delay between IVS events will be in relation to a
connected external alarm. The default is 10 seconds however this can be modified between 10~300 seconds.
Send Email:
This checkbox allows the user to enable the camera to send an email when an IVS event is triggered.
Snapshot
: This checkbox allows a snapshot of the IVS event to be sent via Email when triggered.
Snap Face Image:
This dropdown menu allows the user to select different snapshot options:
Face:
An image of only the face will be sent.
One-inch Photo:
A 1-inch snapshot of the face will be sent.
Snap Mode:
This dropdown menu allows the user to select different snapshot mode options:
Instant Snap:
Sends a lower quality image of the snapshot the moment it occurs.
Optimized Snap:
A higher quality image of the snapshot. There will be a short delay fur to the
optimization of the image.
Quality Priority:
Sets priority of higher quality snapshots to be sent.
Advanced:
This menu allows the user to set advanced face detection options:
Quality Threshold:
Click on the checkbox to set a quality threshold for the snapshot. Once enabled, use
this slider to increase or decrease the threshold quality of the snapshot. The default threshold will be set
to 70, however, it can be adjusted between 1~100.
Duration Optimal:
This option allows the user to set, in seconds, the optimal time in which a snapshot will
be sent. The default duration is set to 10 seconds, however, can be adjusted between 1~300 seconds.
Preset:
Use this dropdown menu to select a preset. Please note a face detection smart plan must be enabled to
select a preset.
Detect Region
: This option is used to set a face detection area. The area will be full screen by default.
Clear:
This option is used to clear any face detection areas currently set.
Exclude Region:
This option is used to set an area in which the face detection rule will not apply.
Clear:
This option is used to clear any excluded face detection areas.
Target Filter:
This option allows the user to set a maximum and minimum size of the target area. By default, this
option will be set to the max resolution, however, it can be manually adjusted.
Draw Target:
Allows the user to set a target area on the live monitor screen.
Clear:
Clears the modified target area to draw the target area on the live monitoring screen.
Pixel Counter
: Used to measure and set the number of pixels in the target area on the live monitoring screen.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
Using Face Detection
Face detection is a tool used to detect
1. Click
Enable
to enable face detection.
2. Click
Setup
to set a schedule, set your periods (if any) and click
Save
to continue.
Note
:
If needed, click on the
Enable Face Enhancement
checkbox to enhance the accuracy of the face detection
image.
3. Enable the
Record
checkbox to record the event.
