6
When accessing your camera, you will notice a few additional wiring connections associated with the device. These
connections contain a power connection and ground, an Ethernet connection, audio wires, and alarm wiring.
POWER -
This connection is optional for this device since the device will draw power via an Ethernet cable (PoE+)
however, the option is there. The camera will require a basic DC 12V/3A power adapter. This wire also has an
optional grounding (EARTH) wire for additional grounding of the unit.
Ethernet Connection -
This connection is used to transmit data and transmit PoE+ power to the unit. The unit is
PoE +
(802.3at) compatible.
AUDIO -
This connection provides two-way audio to the unit. The red wire is for
AUDIO OUT
, the white wire is for
AUDIO IN
, and the black wire is there to ground the audio.
ALARM
- This connection provides alarm in and alarm out features to an external alarm or security system. The
basic overview of these wires are as follows:
Blue
Alarm OUT1
Green
Alarm COM1
Yellow & Green
Alarm Ground
Red
Alarm IN1
Brown
Alarm IN2
MicroSD card Installation
To install a microSD card into your camera, please refer to the step by step guide below.
1.
Locate the microSD card slot can be found on the board behind the reset switch.
2.
Slide the microSD card into the SD card slot, gold pins down.
3.
Gently press the card into place within the slot to click and lock the microSD card into place.
Physical Installation Guide
This installation guide will highlight how to properly install and mount your camera in several different
environments. These environments including wood, masonry (brick /block walls), and cement. Prior to installation,
please ensure that the installation environment can support at least three times the weight of the camera and the
installation bracket.
Note:
There maybe 3 carabiners included with the camera. These carabiners will be used to provide additional
support to the camera after installation. To install, link one carabiner to the mounting bracket then link the third
carabiner to the camera.
The camera will come with proper installation materials such as screws and anchors already, however, if
replacements are needed a 9/16 lag bolt, masonry anchor, cement anchor will be required. Please ensure the
following tools are available and ready for use:
o
Power Drill/impact Drill
o
9/16 Drill Bit (Masonry)
o
9/16 Hex Head Drill Bit
o
Marker or Sharpie