49
Record
: This checkbox allows the user to enable the camera to record video when a video tampering alarm is
triggered.
Record Delay
: This field specifies in seconds how long the delay between alarm activation and recording should be.
Relay Out
: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the
alarm port on the back of the camera) when a video tamper alarm is triggered.
Alarm Delay
: This field specifies in seconds how long the delay between alarm activation and Relay alarm
activation should be.
Send Email
: This checkbox allows the user to enable the camera to send an email when a video tampering alarm is
triggered.
PTZ:
This checkbox allows the user to enable PTZ events to be sent from the camera. This event can be sent via
email alerts or via the web interface directly.
Snapshot
: This checkbox allows the user to enable the camera to take a snapshot when a video tampering alarm is
triggered.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
Smart Motion Detection
Smart Motion Detection (SMD) uses an advanced algorithm to differentiate between human and motor vehicle
shapes within a scene and send alarms only when a person or vehicle is detected.
Below is a screenshot of the
Smart Motion Detection
menu:
Enable:
Use this checkbox to enable Smart Motion Detection.
Effective Object
: The object filter checkboxes allow the camera to be triggered only when a specific object, such as
a human or car, is detected by the camera. Both effective object checkboxes can be activated at the same time.
Human:
This checkbox allows the camera to be triggered only when a human figure is detected.
Motor Vehicle:
This checkbox allows the camera to be triggered only when a vehicle has been detected.
Sensitivity:
Use this dropdown menu to select a sensitivity setting for smart motion detection. The sensitivity can
be set as low, medium, or high.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.